Transfer and feed pumps

FLACO offers you 3 different models as transfer and feed pumps: an electrically powered gear pump, an electrically powered rotary pump and a pneumatically powered double diaphragm pump.

Transfer pump FZP 230

The high performance gear pumps FZP 230 are suitable as transfer pumps for delivering lubricating oils, antifreeze concentrate and mixtures, as well as similar, non-aggressive liquids in a viscosity range of 8 to 2,000 mPa∙s. The delivery capacity is up to 10 l/min., relative to the viscosity.

The pumps are controlled by an on/off switch and are equipped with an AC motor (230 V, 50 Hz) at 0.55 kW and a 5 m connection cable with a safety plug. The overflow valve is adjustable. The pumps are assembled on a stable support frame.

A ¾“ suction line for 200 liter original containers and a 3.5 m long delivery hose DN 16 with a ball valve and bracket with a discharge pipe also are a part of the delivery scope.

Multi-purpose feed pump PM 2

The high performance double diaphragm pumps PM 2 are suitable for the delivery of lubricating oils, antifreeze concentrate and mixtures and such, non-aggressive fluids in the viscosity range of 1 to 10,000 mPa∙s. The feed capacity is at up to 50 l/min., relative to the viscosity.

The pumps can deliver dirt particles up to a size of 3 mm and are suitable for a max. air pressure of 8 bar. They are equipped with a compressed air shutoff valve and mounted on a stable support fixture.

A 1“ suction line for 200 liter original containers and a 3.5 m long delivery hose DN 20 with a ball valve and bracket with a discharge pipe also are a part of the delivery scope.

Water mixture pump FLACOJET 50 K

The water mixture pump FLACOJET 50 K is suitable for the delivery of water and water mixtures. The pump performance is at up to 50 l/min., relative to the counter-pressure. The maximum pump pressure is 5 bar.


The pumps are controlled by a pressure switch and are equipped with an AC motor (230 V, 50 Hz) at 0.37 kW.

A valve combination for an easy motor start, a check valve and a pressure gauge are also a part of the delivery scope. The pump has a connection thread with a ¾“ female thread on both sides.