Your contact at FLACO
FLACOblue200 Basic
Mobile filling system to refill SCR passenger cars and light commercial vehicles with AdBlue® / DEF
The FLACOblue200 Basic is FLACO's new entry-level model, which was developed for the particularly economical AdBlue® refilling of passenger cars.
The device is designed for operation with 210 liter drums as an exchangeable container. This system is far more efficient than manual refilling from small canisters and allows vehicles to be filled quickly and safely.
FLACO mobile filling systems were designed especially for calibrated only (non MID) applications in workshops.
Thanks to having two large rigid wheels and two swivel wheels, the appliance is very maneuverable and rolls easily. A castor brake holds the trolley firmly in place.
High flexibility
The FLACOblue200 unit runs off its integral rechargeable battery and can therefore be used anywhere without delay. A battery charge indicator in the VGA display shows the current battery level and warns the user in good time when the battery needs recharging by means of the integral charger unit. The FLACOblue 200 Basic operated with two flow rates: with a standard speed of about 3,5l/min and a quick-filling function (Boost) with a maximum flow of up to 6,5 l/min.
Quick refilling
The FLACOblue 200 Basic operated with two flow rates: with a standard speed of about 3,5l/min and a quick-filling function (Boost) with a maximum flow of up to 6,5 l/min. This can be set during dispensing. The time sav-ings compared to conventional and manual units is up to 30%.
Reliable automatic nozzle ZV10.2A Basic
The AdBlue® filling nozzle ZV10.2A operates electronically using a fill level sensor. The specially developed Quadro sensor head and programming pre-vent the unwanted dispersion of the frost protection air reserves and thus an overfilling of the tank.
A full hose valve and a precisely fittings components permit an almost drip-free refilling. In order to rule out incorrect refilling, the filling nozzle is adapted to the AdBlue® filler neck and activated with a mismatch-proof feature.
The operating lever can be engaged, The ZV10.2A has been provided with a general approval by TÜV Nord.
The status indication in the control display signals when the fuel nozzle is correctly positioned and the vehicle tank is completely filled.
